Sprinkler Repair in Cary, Raleigh & the Triangle
When a head snaps off, a rotor sprays the driveway, or a corner of the lawn keeps going brown, that’s sprinkler repair — the visible fixes that bring your coverage back. Local and accountable.
The repairs you can see, done right
Sprinkler repair is the above-ground half of an irrigation system: the heads, nozzles, and spray patterns that decide whether your lawn gets even water or a patchwork of puddles and dry spots. It’s the most common call we get, and most of the time it’s a same-visit fix.
We carry the rotors, spray heads, and nozzles used on Triangle systems, so a snapped head or a clogged nozzle usually gets solved on the spot. Where a head has been buried, knocked off its arc, or mismatched with its neighbors, we reset it so the whole zone throws evenly again — and on the region’s heavy clay, we match precipitation rates so the water soaks in instead of running to the curb.
Pick your town below for the local details — Cary’s reclaimed water, Raleigh’s clay and canopy — or call and we’ll tell you what the symptom usually means before we come out.
Sprinkler-head repairs we handle
The visible fixes — heads, nozzles, and coverage.
Broken & snapped heads
Clipped off at the riser by a mower, a car, or foot traffic. We replace and set them flush so they pop up clean.
Misaimed & sunken heads
A rotor watering the driveway or a head buried in turf leaves gaps. We reset arc, height, and rotation.
Clogged & stuck nozzles
Grit and clay silt jam nozzles and stall rotors mid-sweep. We clear or swap them for a full spray pattern.
Dry spots & coverage
Brown crescents usually mean spacing or nozzle mismatch, not dead grass. We match heads so the zone greens up evenly.
Leaking heads & seals
A head that weeps between cycles or floods at start-up is a worn seal. We rebuild or replace to stop the waste.
High-efficiency upgrades
Swapping tired sprays for matched high-efficiency nozzles cuts runoff on clay and tightens coverage.
If a whole zone is dead, a valve is stuck, or the controller’s acting up rather than a head, that’s system-level work — see irrigation repair.
Specialized sprinkler & irrigation repairs
Beyond the visible heads, we handle the system-level and specialty repairs too — each has its own page with the full detail.
Sprinkler pipe repair →
Cracked or leaking PVC and poly lines — lateral and mainline, with minimal digging.
Main line break repair →
The constantly pressurized line that runs 24/7 when it breaks. Fast, clean cut-in repairs.
Leak detection →
High water bill with nothing on the surface? We locate hidden leaks so we dig once.
Sprinkler valve repair →
Valves and solenoids that stick open or shut. We rebuild rather than replace the manifold.
Zone not working →
A whole zone dead or stuck on. We trace it to the valve, solenoid, or wiring first.
Low pressure & coverage →
Misting, weak throw, dry spots. We find where the pressure is being lost.
Electrical & wiring →
Nicked wires, corroded splices, lightning-hit controllers, dead solenoids.
Contractor / utility damage →
Lines cut by fence, fiber, or utility crews. We repair and document the damage.
Emergency repair →
A gusher or a zone that won’t shut off. We stop the water loss fast.
Choose your town
Every town page is written for that town’s water rules and conditions — not a copy with the name swapped. All six of our core towns are live.
Cary, NC
Raleigh, NC
Apex, NC
Morrisville, NC
Holly Springs, NC
Fuquay-Varina, NC
Why homeowners call us for repairs
No rotating crews
You get the same local team — not a rotating crew — so the fix is done right.
Parts on the truck
We stock the common heads and nozzles, so most repairs are handled in a single visit.
Upfront pricing
A clear estimate before we start, and we hold to the number we quote. Free to get the estimate.
Sprinkler repair FAQ
What’s the difference between sprinkler repair and irrigation repair?
Sprinkler repair is the visible parts — heads, nozzles, and spray coverage. Irrigation repair is the system underneath: valves, mainlines, controllers, wiring, and backflow. A dead zone or a system that won’t shut off is system-level; a broken head or dry patch is sprinkler repair.
Can you fix a brown patch in my lawn?
Usually, and it’s rarely the grass. A dry patch almost always comes from a misaimed head, a clogged nozzle, or heads that don’t match across the zone. We check coverage, reset arcs, and match nozzles so the area gets even water.
Do you carry the parts to fix it same-visit?
We stock the common rotors, spray heads, and nozzles used on Triangle systems, so most head repairs are a same-visit fix. Odd or discontinued heads we match to a current equivalent that drops right in.
How much does a sprinkler repair cost?
It depends on the problem, but most repairs are affordable and we give you upfront pricing before any work begins. The estimate is free — call or text 919-341-9644.
Broken head or a dry spot?
Fast, guaranteed sprinkler repair from a local, accountable team. Upfront pricing.
Get your free sprinkler repair quote
Tell us what’s going on and we’ll get right back to you — usually the same day. Prefer to talk? Call or text 919-341-9644.
- Local, licensed & insured
- Upfront pricing — no surprises
- 100% guarantee + 12-month workmanship warranty
Recent work around the Triangle
